Equipment List

Production Equipment

Purpose	Equipment Name	Remarks
Mixers and Stirrers	Disper (High Shear Stirring Machine)	Blade diameter: 120 mmφ to 350 mmφ. Mixer and stirrer for low-viscosity liquids. Capable of full mixing with a turntable.
	Hivis Disper Mix (Triple-shaft planetary mixer, dispersing, mixing and kneading machine)	Tank capacity: 250 L, jacket included. Mixer and stirrer for high-viscosity liquids. Capable of heating (up to 80°C) and cooling (water-cooled).
	Butterfly Mixer (High-Viscosity Mixing Machine)	Butterfly-shaped blade, jacket included. Mixer and stirrer for high-viscosity pastes. Capable of steam heating (up to 140°C).
	Henschel Mixer (High-Speed Stirring and Mixing Machine)	100 L to 500 L. High-speed stirrer for powders. Capable of heating (up to 140°C) and cooling (water-cooled).
	V-Blender (Rotating Container Type Mixing Machine)	500 L to 1500 L. Mixer for powders.
	Tumbler Mixer (Rotating Container Type Mixing Machine)	200 L to 5000 L. Mixer for powders.
Dispersers	Dyno-Mill (Horizontal Bead Mill)	Dispersion chamber volume: 5 L to 46 L, bead diameter: 0.5 mmφ to 2.0 mmφ. Disperser for low-viscosity liquids. Ceramic specifications available.
	SC Mill (Circulating Bead Mill)	Dispersion chamber volume: 2.8 L, bead diameter: 0.2 mmφ to 1.0 mmφ. Disperser for low-viscosity liquids. Capable of high-intensity dispersion.
	Nanovater (Wet High-Pressure Micronizer)	Maximum pressure: 200 MPa. Media-free disperser for low-viscosity liquids.
	Triple-Roll Mill	Roll diameter: 4 inches to 16 inches. Disperser for high-viscosity pastes. Capable of heating (up to 140°C) and cooling (water-cooled), ceramic specifications available.
	Double-Roll Mill	Roll diameter: 12 inches. Disperser for rubber and high-viscosity resins. Capable of heating (up to 80°C) and cooling (water-cooled).
	Single-Screw Extruder	Screw diameter: 40 mmφ to 70 mmφ. Resin extruder for masterbatch production.
	Twin-Screw Extruder	Screw diameter: 54 mmφ. Resin extruder for masterbatch production. Compatible with liquid addition systems and side feeders.
Cutting machine	Rotary Blade Pelletizer	Strand-cut type. For masterbatch production.
Classifiers	Vibrating Sieve	Diameter: 800 mmφ to 1000 mmφ. Screening machine for powders.
Crushers	Plastic Mill	Coarse crusher for solids.
	Feather Mill	Coarse crusher for solids.
	Line Impact	Coarse crusher for solids.
	Hammer Mill	Fine crusher for powders.
Auxiliary Equipment	Mobile Liquid Tank	150 L to 1300 L, jacketed versions available. Capable of heating (up to 80°C) and cooling (water-cooled).
	Diaphragm Pump	Sanitary specifications. Diaphragm made of Teflon. Capable of reducing metal contamination.
	Gear Pump
	Mono Pump	SUS or ceramic specifications. For high-viscosity liquids.
	Electric Shelf Dryer

Evaluation Equipment

Purpose	Equipment Name	Remarks
Spectral Colorimeters	Spectrophotometer for Color Measurement	CM-3600A. Measurement range: 360 nm to 740 nm. Measures transmittance and reflectance to quantify color.
Spectrophotometers	UV-Vis-NIR Spectrophotometer	UV-3600Plus. Wavelength range: 185 nm to 3300 nm.
	UV-Vis Spectrophotometer	UVmini-1280. Wavelength range: 190 nm to 1100 nm.
	Infrared Spectrophotometer	IR-Affinity-1. Equipped with ATR and microspectroscopy. Wavelength range: 7800 cm-1 to 350 cm-1.
Optical System Evaluation Equipment	Haze Meter	NDH7000. Measures haze, total light transmittance, diffuse transmittance, parallel transmittance, and turbidity.
	Variable Angle Gloss Meter	UGV-5. The incident and receiving angles can be changed freely.
Chemical Analysis Instruments	Gas Chromatography	GC-2030. Equipped with auto-sampler.
	pH Meter	D-54. Glass electrode
	Potentiometric Titrator	AT-710. Automatic potentiometric titration system
Moisture Measurement Devices	Karl Fischer Moisture Meter	MKA-610. Uses volumetric titration method. Equipped with moisture vaporizer.
Material Analysis Instruments	Differential Scanning Calorimetry & Thermogravimetric Analyzer	TG-DTA8122 Equipped with auto-sample changer.
	Wavelength Dispersive X-Ray Fluorescence Analyzer	Primus II. Collimator: 0.5 mmφ to 37 mmφ in diameter. Element analysis range: Be to U.
	Scanning Electron Microscope	JSM-IT200(LA). Equipped with energy-dispersive X-ray spectroscopy (EDS).
Particle Size Distribution Measurement Instruments	Laser Diffraction/Scattering Particle Size Analyzer	LA-960. Measurement range: 0.01 μm to 3000 μm.
	Dynamic Light Scattering Particle Size Analyzer	Nanotrac Wave-II. Measurement range: 0.8 nm to 6500 nm.
Observation Equipment	Optical Microscope	BX-43. Capable of bright-field, phase-contrast, and dark-field observation.
	Digital Microscope	VHX-7000. Lens magnification: 20x to 2500x.
Resin Testing Equipment	Melt Indexer	Semi-Automatic Melt Indexer 3A. Test loads: 0.325 kg, 2.16 kg, 5 kg, 10 kg.
Weather Resistance Testing Machines	UV Fade Meter	UV Fade Meter U48. Light source: UV carbon arc lamp.
UV Exposure Equipment	UV Irradiation Device	ECS-151U. Lamp current: 1.5 kW, irradiation distance: 100 mm to 155 mm.
Viscosity Measurement Equipment	B-Type Rotational Viscometer	BM Type/BH II Type. Brookfield Viscometer
	E-Type Rotational Viscometer	TV-30. Cone-Plate Rotational Viscometer
Conductivity Measurement Equipment	Surface Resistance Meter (Loresta)	MCP-HT450. Measurement range: 10^3 to 10^7Ω
	Surface Resistance Meter (Hiresta)	MCP-T610. Measurement range: 10^4 to 10^13Ω.
Density Measurement Equipment	Density Meter	AUW-120D/SMK-401. Measurement by liquid immersion method.
	Specific Gravity Cup	Metal Pycnometer. Volume: 100 cm³.
	Bulk Density Measuring Device	JIS-5101 Bulk Density Measuring Device. Container capacity: 30 ml.
Measurement Environment	Temperature and Humidity Controlled Chamber	TBR-1. Temperature range: -10°C to 80°C. Humidity range: 20% to 95% RH.
Dryers	Kett Moisture Meter	FD-660. Carbon heater type.
	Electric Furnace	STPH-102. Programmable oven. Room temperature to 500°C.
	Explosion-Proof Oven	SPH-102. Explosion vented thermostatic chamber. Room temperature to 200°C.